+86-18080970736
matched load
Review of the product Agreed loading – It is a specialized terminal device for high frequency/microwave systems. Representing the equivalent of standard impedance, it completely absorbs the power of the incident wave, eliminates reflections at the end of the line, stabilizes the impe...
Description
marker
Review of the product
A coordinated load is a specialized terminal device for high frequency/microwave systems. Representing the equivalent of standard impedance, it completely absorbs the power of the incident wave, eliminates reflections at the end of the line, stabilizes the impedance of the path and increases the stability of the system. It is also used to plug unused ports, coordinate measuring system terminals and safely dissipate power. The key characteristics are heat sink and reliability.
Key functions
Providing a standard consistent impedance of 50 ohms/75 ohms at the output.
• Full absorption of falling power with extremely low reflection.
• Sealing of unused ports and shielding from external interference.
• Safe power dissipation to provide a simulation mode of the system.
Scope of application
Coordination of terminals of high-frequency devices, protection of unused ports of radio-frequency and microwave equipment, protection of power amplifiers when working without load, equipment of measuring systems, etc.
Typical technical parameters
| Name of the parameter | Operating frequency range | Nominal impedance | harbour security | Nominal allowable power | Operating temperature | Constructive implementation | Type of connector |
| Model indicators | 10 MHz ~ 100 GHz, to order | 50 Ohms, 75 Ohms to order. | 1.1 ~ 1.8, higher at the upper frequency limit | 1 W ~ 1000 W, custom-made | -40 °C ~ +85 °C, by order or option | Wave module, coaxial module, integrated plate, chip | Wave, coaxial: SMA, BNC, N-type, 2.92 mm, 1.85 mm; pin connector, microstrip; mounting of the crystal with gold wire |
contact us
Send an inquiry
Related popular products
attenuator
Review of the product Attenuators are divided into fixed and regulated. They're predestined...
System for measuring spectral characteristics and power
Structural scheme of the measuring system The measurement system is divided into a system...
detector
Review of the product The detector is a specialized device that converts high frequency.
directional coupler
Review of the product directional coupler is a specialized device for selecting...
power divider/combiner
Review of the product The power divider/summator divides a single signal into ...
power amplifier
Review of the product Power amplifier is a key active device in radio frequency.
Transmission switch module
Review of the product In systems with time separation of reception and transmission, such as radio
Receiving channel module
Review of the product Any radio device that has a reception function must have a...
low-noise amplifier
Review of the product The low-noise amplifier is mainly used in the input cascades.
Power amplifier module
Review of the product A device that amplifies the signal level of a frequency source or input
Circulator, isolator
Review of the product Circulator and isolator are specialized control devices on the...
Frequency source module
Review of the product In electronic circuits, a frequency source is a device that provides...
signal generator
Review of the product The generator is a device for the formation of a reference frequency in radio frequency.
Filter
Review of the product The filter is a key device for frequency selection, suppression of pa...